Back to Printing Parts Again

Posted on December 18, 2009 by Jeff Keegan

I got the RepStrap back again today, and tonight I was able to print 9 new pieces (6 unique types). Here are 8 (5 types) of them:

Left: y-idler-bracket_1off, Top: xlr-bracket_1off, Bottom: circuit-board-spacer-m4_2off, TopRight: y-bar-clamp_10off, Right: drive-pulley_3off

(the one at the bottom is a little grey because we’d been printing with black ABS before this and it took a while to clear out).

I decided it was time to bolt the acryllic down to the wood base (previously it was just double-side taped).

The 9th piece is printing now while I should be sleeping. I can see it on my iPhone because I set up my Rovio on the desk to point at the print bed up close. The screenshot is rotated, but here’s a screenshot of the piece that’s currently printing:

You can see the right corner curling up now. Man I really need to make a heated bed. Why is it always that same corner I wonder?

Jeff sleep now.

[Update: Unattended Print Fail (again): (IPhone screenshot of Rovio – low res)

I guess the other corner finally came up too! A heated bed can’t come soon enough.. I need some aluminum…

This entry was posted in MyRepRap. Bookmark the permalink.

61 Responses to Back to Printing Parts Again

Newer Comments →

  1. Pingback: Back to Printing Parts Again

  2. Pingback: Back to Printing Parts Again

  3. Pingback: Back to Printing Parts Again

  4. Pingback: Back to Printing Parts Again

  5. Pingback: Back to Printing Parts Again

  6. Pingback: Back to Printing Parts Again

  7. Pingback: Back to Printing Parts Again

  8. Pingback: Back to Printing Parts Again

  9. Pingback: Back to Printing Parts Again

  10. Pingback: Back to Printing Parts Again

  11. Pingback: Back to Printing Parts Again

  12. Pingback: Back to Printing Parts Again

  13. Pingback: Back to Printing Parts Again

  14. Pingback: Back to Printing Parts Again

  15. Pingback: Back to Printing Parts Again

  16. Pingback: Back to Printing Parts Again

  17. Pingback: Back to Printing Parts Again

  18. Pingback: Back to Printing Parts Again

  19. Pingback: Back to Printing Parts Again

  20. Pingback: Back to Printing Parts Again

  21. Pingback: Back to Printing Parts Again

  22. Pingback: Back to Printing Parts Again

  23. Pingback: Back to Printing Parts Again

  24. Pingback: Back to Printing Parts Again

  25. Pingback: Back to Printing Parts Again

  26. Pingback: Back to Printing Parts Again

  27. Pingback: Back to Printing Parts Again

  28. Pingback: Back to Printing Parts Again

  29. Pingback: Back to Printing Parts Again

  30. Pingback: Back to Printing Parts Again

  31. Pingback: Back to Printing Parts Again

  32. Pingback: Back to Printing Parts Again

  33. Pingback: Back to Printing Parts Again

  34. Pingback: Back to Printing Parts Again

  35. Pingback: Back to Printing Parts Again

  36. Pingback: Back to Printing Parts Again

  37. Pingback: Back to Printing Parts Again

  38. Pingback: Back to Printing Parts Again

  39. Pingback: Back to Printing Parts Again

  40. Pingback: Back to Printing Parts Again

  41. Pingback: Back to Printing Parts Again

  42. Pingback: Back to Printing Parts Again

  43. Pingback: Back to Printing Parts Again

  44. Pingback: Back to Printing Parts Again

  45. Pingback: Back to Printing Parts Again

  46. Pingback: Back to Printing Parts Again

  47. Pingback: Back to Printing Parts Again

  48. Pingback: Back to Printing Parts Again

  49. Pingback: Back to Printing Parts Again

  50. Pingback: Back to Printing Parts Again

Newer Comments →

Leave a Reply

Your email address will not be published. Required fields are marked *

Captcha loading...